OCTAGON PROCESS -- HEAT TRANSFER FLUID  -- 6850-00-078-4459
<pre>=====================  Product Identification  =====================

Product ID:HEAT TRANSFER FLUID
MSDS Date:01/01/1985
FSC:6850
NIIN:00-078-4459
MSDS Number: BCXNR
=== Responsible Party ===
Company Name:OCTAGON PROCESS
Emergency Phone Num:(201)945-9400
CAGE:82925
=== Contractor Identification ===
Company Name:OCTAGON PROCESS INC.
Address:596 RIVER ROAD
Box:City:EDGEWATER
State:NJ
ZIP:07020
Country:US
Phone:201-945-9400
CAGE:82925

=============  Composition/Information on Ingredients  =============

Ingred Name:ETHYLENE GLYCOL  (SARA III)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 65%
OSHA PEL:C 50 PPM
ACGIH TLV:C 50 PPM,VAPOR; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 35%

=====================  Hazards Identification  =====================

Effects of Overexposure:INGES-ABDOMIN DISCOMFT,PAIN
    DIZZ,MALAISE,LUMBER,PAIN,OLIGURIAUREMIA CNS DEPRESS,HEADACH,THROAT
    IRRIT

=======================  First Aid Measures  =======================

First Aid:SMALL-IF CONSCIOUS,INDUCE VOMIT,CALL MD IMMED SKIN-REMOVE
    CONTAM CLOTHES,FLUSH SKIN W/WATER INHAL-REMOVE TO FRESH AIR.
    EYES-FLUSH WITH WATER.

=====================  Fire Fighting Measures  =====================

Flash Point:232FCC-PURECOMP
Lower Limits:3.2
Extinguishing Media:CO*2, FOAM, DRY CHEM & H*2O FOG.
Fire Fighting Procedures:SUPPLIED BREATHING AIR & PROTECTIVE CLOTHING
Unusual Fire/Explosion Hazard:NONE NOTED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SMALL SPILLS SHOULD BE FLUSHED WITH LARGE
    QUANTITIES OF WATER.LARGE SPILLS SHOULD BE COLLECTED FOR DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT TAKE INTERNALLY.DO NOT BREATHE
    MIST,AVOID PROLONGED OR REPEATED BREATHING OF VAPOR
Other Precautions:NONE SPECIFIED BY MFR

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:AIR SUPPLIED MASK IN HIGH CONCENTRATIONS
Ventilation:MECH ROOM VENT IF WITHIN ENCLOSED EQUIP,OTHRWISE LOCAL
Protective Gloves:PLASTIC
Eye Protection:SAFETY GLASSES
Other Protective Equipment:SAFETY SHOWER & EYE BATH
Supplemental Safety and Health
MSDS UNDATED SAFETY DATA ENHACED BY DGSC-STF USING UNION CARBIDE MSDS
    DATA.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:ABOVE 232F
Vapor Pres:12
Vapor Density:1.1
Spec Gravity:1.089
Evaporation Rate &amp; Reference:0.75 BUTYL ACETATE
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR,WATER WHITE LIQUID,CHARACTERISTIC ODOR
Percent Volatiles by Volume:40

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE NOTED BY MFR
Stability Condition to Avoid:NONE NOTED
Hazardous Decomposition Products:MAY PRODUCE CARBON MONOXIDE AND/OR
    CARGON DIOXIDE

====================  Disposal Considerations  ====================

Waste Disposal Methods:MAY BE SIPOSED OF IN BIOLOGICAL WSTEWATER
    TREATMENT PLANT. MIX WITH FLAMMABLE SOLVENT, & INCINERATE IN
    FURNACE WHERE PERMITTED UNDER APPROPRIATE FEDERAL,STATE & LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.